A door is as vital as the lock that secures it and a lock can only do its work if it is appropriately installed. Flawed installation of a door lock will give way for the door to be mistakenly broken into, unfortunately, the signs for that may not be apparent during the start.
Putting first safety measures and knowing how to spot safety hazards will help resolve future safety concerns. If you’re uncertain about the exceptional of your current lock setup, it might be time to call a professional door lock installation service to make certain your protection.
1. The Door Falls Out Of Alignment
One of the indicators that a door lock has been poorly installed is when it is unable to close completely. Look for the space between the door and its frame as well as the issue where the door gets stuck when closed. Realignments for the door lock setting can be provided through inexpensive door repair services and that ensures the safety of the house as well. Seeking cheap door repair services can assist you to realign the door and lock machine, making sure the right characteristics without breaking the bank.
2. Jammed Locks or Sticky Locks
Sticky or jammed door locks often indicate that there is an error during the installation of the door lock. Locks that will not turn or get stuck can be very irritating and at the same fear for your security. Some common causes include:
- Parts Not Properly Aligned: Internal parts of the lock which would allow smooth movements are not properly fitted making friction occur hence causing the lock to turn roughly.
- Screws That Are Fitted Too High Or Low: Plates that are higher up or even lower than normal will not allow the latch to fit correctly making it unreasonably hard to engage the lock.
- Loose Screws: Screws or components that are not fastened correctly or left loose will result in a shaky or non-working lock.
3. Non-responsive Mechanism
Lately this one has been a major issue if the lock turns it doesn’t feel any tighter when the key is put in so the lock can’t be turned it just stays in what can be usually this means that the locks not been fitted properly.
4. Symmetrical Locking Force
The locks design is meant to be parallel so when you put a key and you lock the handle the pressure should be applied uniformly across the lock fingers so if all the lock fingers aren’t even then that is a concern and is quite rough in normal lock usage.
5. Spaces between the Door and the Frame
Gaps or spaces between the actual frame and the door are a clear sign that the lock has not been installed correctly which may pose a security issue and this can potentially occur if the lock was set in the wrong place or the door was placed incorrectly.
6. You’re Constantly Adjusting Your Lock
Here are a few reasons why this misalignment issue exists:
- Bad Fit: Sometimes, the lock and strike plate is not installed in the right position, and the latch or the bolt fails to engage, and this means constant adjustments have to be made.
- Loose Locking Mechanism: If the components that are parts of the locks are not secured tightly during installation, then over time, the parts can become loose which ends up causing the locks to be faulty.
- Warped Door or Frame: In some cases, the door or the frame that it has to close into is slightly warped which ends up requiring the lock to be moved into the correct position for proper fitting.
Why Always Hire a Professional Door Lock Installer?
Unless you want to get into trouble, don’t ever try saving costs by doing it yourself. Seeking cheap door lock installation services is usually not the best option. Professional installation will ensure that the mechanism is mechanically durable and perfectly designed.
